Categories
Message
JXC100H
Products Description
JX C-100H Heavy-Duty Wood Chipper: Maximum Throughput for High-Volume Commercial Operations
300mm Capacity | 240kg Rotor | 100HP | 25-30 m³/h
The JX C-100H represents the pinnacle of JX wood chipper engineering — a high-capacity machine designed for operations where volume defines profitability. Available in both stationary and tracked undercarriage configurations, the W-100H delivers the same crushing performance regardless of mobility needs. Powered by a 100HP diesel engine and equipped with a massive 480mm disc rotor weighing 240kg, this chipper processes branches and whole tree sections up to 300mm (12 inches) in diameter at an industry-leading 25-30 cubic meters per hour. For biomass producers, municipal recycling centers, and large-scale forestry contractors, the JX C-100H is not an expense — it’s a productivity multiplier.
Two Configurations, One Performance Standard
| Configuration | Best For | Weight | Dimensions (L×W×H) |
| Stationary | Fixed-site operations: recycling yards, biomass plants, sawmills | 2058 kg | 3680 × 1660 × 2370 mm |
| Tracked Undercarriage | Mobile operations: forestry, land clearing, utility work | 2860 kg | 3680 × 1900 × 2740 mm |
Both configurations share the same core cutting system, engine, and output capacity. The tracked version adds 802kg of undercarriage weight and increased dimensions for all-terrain mobility, while the stationary version offers a lower profile and lighter weight for permanent installation.
Massive Cutting System
The W-100H starts where other chippers reach their limit. The 975×740mm feed hopper accepts large, bushy material with minimal limb trimming. Inside, the 300mm chipper opening swallows whole branches up to 12 inches in diameter. Four A8 tool steel knives — each measuring 120×230×17mm — are mounted on a 480mm diameter disc rotor that extends 610mm in length and weighs 240kg. This rotating mass stores significant inertia, maintaining cutting speed through the toughest hardwoods and frozen material.
Chip Quality That Sells
The W-100H produces wood chips ≤10mm — consistent, uniform, and marketable. Whether you’re supplying biomass fuel to power plants, decorative mulch to landscaping supply yards, or bedding material for agricultural operations, chip quality matters. The W-100H delivers chips that command premium prices.
Dual Hydraulic Feed System
Fully hydraulic feed rollers pull material into the cutting chamber at adjustable speeds, optimizing throughput for different wood species and moisture content. The instant reverse function clears jams without stopping the engine or opening safety covers — keeping operators safe and production moving.
Tracked vs. Stationary: Which Fits Your Operation?
| Consideration | Stationary | Tracked |
| Primary Use | Fixed recycling yard, biomass plant, or sawmill | Mobile forest clearing, pipeline ROW, utility line work |
| Transport | Load with forklift or crane | Drive onto low-boy trailer |
| Site Conditions | Level, prepared surface | Rough terrain, slopes, soft ground |
| Setup Time | One-time installation | Minutes — drive and chip |
| Investment | Lower initial cost | Higher for undercarriage |
100HP of Commercial Power
The 100HP diesel engine provides the torque required to spin the 240kg rotor through dense hardwoods, knotty softwoods, and frozen timber. Electric start, liquid cooling, and industrial-grade components ensure reliable operation across full shifts in all weather conditions.
Specifications Comparison
| Parameter | Stationary | Tracked Undercarriage |
| Rotor Disc Diameter | 480 mm | 480 mm |
| Rotor Length | 610 mm | 610 mm |
| Rotor Weight | 240 kg | 240 kg |
| Number of Knives | 4 | 4 |
| Knife Material | A8 tool steel | A8 tool steel |
| Knife Dimensions (L×W×H) | 120 × 230 × 17 mm | 120 × 230 × 17 mm |
| Feed Hopper Opening (W×H) | 975 × 740 mm | 975 × 740 mm |
| Chipper Opening (Diameter) | 300 mm | 300 mm |
| Chip Size | ≤10 mm | ≤10 mm |
| Packing Size (L×W×H) | 3310 × 2050 × 1460 mm | 3310 × 2050 × 1890 mm |
| Overall Size (L×W×H) | 3680 × 1660 × 2370 mm | 3680 × 1900 × 2740 mm |
| Machine Weight | 2058 kg | 2860 kg |
| Power Required | 100 HP | 100 HP |
| Working Efficiency | 25-30 m³/h | 25-30 m³/h |
Who Needs the JX C-100H?
| Operation | Recommended Configuration | Why |
| Biomass Fuel Producer | Stationary | Fixed installation, continuous operation, hopper-fed |
| Municipal Recycling Yard | Stationary | Process storm debris, yard waste, clean wood |
| Large Forestry Contractor | Tracked | Move between cutting sites, chip at roadside |
| Utility Vegetation Manager | Tracked | Follow line-clearing crews across varied terrain |
| Land Clearing Specialist | Tracked | Access remote sites, chip and spread on-site |
Why Choose the JX C-100H?
| Feature | What It Delivers | |
| 300mm Chipper Capacity | Process 12-inch material — whole tree sections | |
| **240kg Rotor,610mm Length** | Massive inertia for sustained cutting power | |
| 100HP Diesel Engine | Commercial power for all-day, every-day operation | |
| ≤10mm Chip Size | Premium chips for biomass, mulch, or bedding | |
| A8 Tool Steel Knives | Long life, field-reversible, replaceable | |
| Dual Hydraulic Feed | Self-feeding with instant reverse for jam clearing | |
| Stationary or Tracked | Match the machine to your operation, not the other way | |
| 25-30 m³/h Efficiency | Process a full log truck load in hours |
300mm capacity. 240kg rotor. Two configurations. One choice for high-volume production.
Choose the JX C-100H.