GP1300 Dual-Engine, Dual-Cutting-Head Remote-Controlled Mower

The GP1300 is a heavy-duty remote-controlled mower designed for large grasslands, orchards, farms, roadside areas, solar farms, slopes and overgrown land. With a 1,300 mm cutting width, dual gasoline engines and a dual-cutting-head system, it combines strong performance, high efficiency and excellent terrain adaptability. It is suitable for both routine vegetation maintenance and demanding land-clearing applications.

1. Dual-Engine Power System

The GP1300 is powered by two Loncin 224 gasoline engines. Compared with a conventional single-engine mower, the dual-engine configuration provides greater power reserves during continuous operation and under heavy cutting loads. It helps maintain stable performance when working through tall grass, dense weeds and tough vegetation.

The engine shaft speed reaches approximately 2,500 rpm, providing reliable power for efficient cutting. Remote engine start and stop allow the operator to control the machine without approaching the cutting area.

2. Wide 1,300 mm Cutting Width

The 1,300 mm cutting width allows the machine to cover a larger area in each pass, reducing repeated travel and improving overall productivity. Its working efficiency can reach approximately 4,000 m²/h under suitable conditions.

This wide cutting range makes the GP1300 ideal for large farms, orchards, pastures, municipal green areas, roadside vegetation, solar power stations and land-maintenance projects where both speed and efficiency are important.

3. Dual Cutting Heads for Stable and Even Mowing

The mower uses two cutting discs equipped with four small straight blades. The dual-head design distributes the cutting load more evenly across the 1.3-meter deck, helping reduce missed strips and providing a cleaner, more consistent result.

The standard grass-cutting blades are suitable for routine mowing, while optional land-clearing blades can be installed for dense weeds, tough stalks and more demanding vegetation. This flexible blade configuration allows one machine to handle different working environments.

4. Adjustable Cutting Height

The cutting height can be adjusted from 5 to 200 mm by remote control. A lower setting is suitable for lawns, orchards and regular ground maintenance, while a higher setting is useful for uneven terrain, tall grass and initial land-clearing work.

Remote height adjustment allows the operator to respond quickly to changing vegetation and ground conditions without stopping the machine for manual adjustment.

5. Long-Distance Remote Control

The remote-control distance is up to 800 meters in open conditions. The operator can control machine movement, steering, engine start and stop, and cutting-height adjustment from a safe position.

Remote operation reduces direct exposure to rotating blades, flying debris, steep slopes, dense vegetation and other potentially dangerous conditions. It also improves visibility and makes the machine easier to guide through difficult or restricted areas.

6. Powerful 48V Electric Drive System

The GP1300 uses a 48V high-speed drive motor system with high torque and a rated speed of approximately 3,200 rpm. Electric drive provides smooth movement, responsive steering and stable low-speed control.

The machine is powered by four 48V 20A batteries for the drive system. Independent track control allows flexible turning and makes it easier to operate around trees, obstacles, field edges and narrow working areas.

7. Strong Slope Adaptability

The machine is suitable for slopes of up to 60 degrees under appropriate ground and operating conditions. Its low center of gravity, tracked chassis and remote-control system provide greater stability than many conventional wheeled mowers.

Because the operator does not need to ride on or walk directly behind the machine, the GP1300 is especially suitable for embankments, orchard slopes, drainage areas and other locations where manual mowing may be difficult or unsafe.

8. Wide Reinforced Tracks

The machine is equipped with 180 mm wide rubber tracks. The wide contact area improves traction, reduces ground pressure and helps prevent slipping or sinking on soft or uneven surfaces.

The tracked chassis offers better mobility on grass, loose soil, slopes and rough terrain. It also provides a more stable operating platform for the wide dual-cutting-head system.

9. Extended Continuous Operation

A 20-liter stainless-steel fuel tank supports longer working periods and reduces the need for frequent refueling. Standard fuel consumption is approximately 2 liters per hour, depending on vegetation density, terrain and operating load.

The stainless-steel tank offers good corrosion resistance and durability, making it suitable for long-term outdoor use and commercial mowing projects.

10. Heavy-Duty Construction

The GP1300 has an approximate machine weight of 400 kg and a packed weight of approximately 450 kg. Its substantial construction improves stability during high-speed cutting and helps reduce vibration when working through dense vegetation.

The machine also uses automotive-grade electrical switches for improved durability in outdoor environments. These components are designed to better withstand vibration, dust and frequent operation.

11. Multifunction Color Display

A multifunction full-color LCD screen provides clear and convenient operating information. The display helps the operator monitor the machine’s working condition and improves overall operating convenience.

Key Specifications

Model: GP1300
Machine Type: Dual-engine, dual-cutting-head remote-controlled mower
Engine: Dual Loncin 224 gasoline engines
Engine Shaft Speed: 2,500 rpm
Cutting Width: 1,300 mm
Cutting Height: 5–200 mm
Maximum Applicable Slope: Up to 60°
Remote-Control Distance: Up to 800 m
Blade System: Two cutting discs with four small straight blades
Optional Blade: Heavy-duty land-clearing blade
Working Efficiency: Approximately 4,000 m²/h
Standard Fuel Consumption: Approximately 2 L/h
Fuel Tank: 20 L stainless-steel tank
Drive System: 48V high-speed, high-torque electric drive
Drive Motor Speed: Approximately 3,200 rpm
Battery System: 48V 20A, four batteries
Track Width: 180 mm
Display: Multifunction full-color LCD screen
Machine Weight: Approximately 400 kg
Packed Weight: Approximately 450 kg
Switches: Automotive-grade electrical switches
Starting Method: Remote engine start and stop
Lifting Method: Remote-controlled adjustment

With its dual-engine power, 1,300 mm cutting width, dual cutting heads, remote operation and tracked chassis, the GP1300 provides an effective solution for high-efficiency mowing and land clearing. It offers the productivity required for large projects while improving safety, maneuverability and adaptability across challenging terrain.